Fuel pump / fuel position sensor. Commonly used for (but not limited to) 400cc, 500cc and 700cc engines, such as the Hisun 400cc, Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, re... More Details

Fuel pump. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other... More Details

This pump is most commonly used for (and not limited to) 200cc to 250cc water cooled engines. ... More Details

This pump is most commonly used for (and not limited to) 200cc to 250cc water cooled engines. ... More Details

Fuel pump assembly. Most commonly used for (but not limited to) 260cc and 300cc liquid cooled ATV's, UTVs, dirt bikes / pit bikes, scooters, dune buggies, go karts and other similar products. Manufa... More Details

Fuel Mixing Canister with maximum volume of 500ml. Molded markers indicate fill levels for 20:1, 25:1 and 40:1 gas:oil ratios. ... More Details

Fuel line with length of 28cm (11 inches) with two 7mm hose spring clamps. Three total pieces. ... More Details

Fuel line kit primarily (though not exclusively) used for 2-stroke gas bicycle conversion kits. Kit includes fuel filter, gas line and two clamps. This is a very common size of fuel line and fuel fi... More Details

Fuel line clamp, 8mm spring clamps, 4 pieces. ... More Details

Fuel line clamp, 10mm (1cm) spring clamps, 4 pieces. ... More Details

Tubing for carburetors and fuel lines, black. Most commonly used for larger ATV's and dirt bikes such as 250cc, 300cc, 400cc, 500cc etc. This is high quality tubing with heavy resistance to drying, ... More Details

Tubing for carburetors and for fuel lines 20m roll Grey. This is high quality tubing with heavy resistance to drying, cracking and thinning. Fuel line inner diameter is rated as 5 to 5.5mm. Will ... More Details

Tubing for carburetors and for fuel lines. 10m rolls in of clear (aka translucent or transparent) fuel line. Fuel line inner diameter is rated as 5 to 5.5mm. Outer diameter approximately 8mm. Wil... More Details

Tubing for carburetors and for fuel lines. 10m rolls Fuel line inner diameter is rated as 5 to 5.5mm. Will work with connections (carburetor, gas tank and fuel filter outlets/intakes) ranging fro... More Details

This fuel tank joint assembly is typically found in the Fuel Tank / Engine (Fuel Tank, Recoil Starter, Muffler) section of several part manuals. Commonly used for but not limited to GX110, GX120, GX... More Details

Fuel injector mounting seat. Commonly used for (but not limited to) 400cc, 500cc and 800cc engines, such as the Hisun 500cc and Hisun 800cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones,... More Details

Fuel injector mounting seat. Commonly used for (but not limited to) 400cc and 700cc engines, such as the Hisun 400cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displa... More Details

This Fuel Injector, ATV, Hisun, 800cc is used for a wide displacement range of ATVs. Most popularly applies to 800cc ATVs from companies like Hisun (HSUN) and Powermax. Common listed manufacturer p... More Details

Fuel injector. Commonly used for (but not limited to) 700cc engines, such as the Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. These machines are c... More Details

Fuel injector. Commonly used for (but not limited to) 500cc engines, such as the Hisun 500cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. These machines are c... More Details

Fuel filter / Gas filter commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. Popularly used in the Chir... More Details

This fuel filter / gas filter is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. Common Odes model names consist of variations ... More Details

High quality VISUAL FILTER HIGH FLOW/HIGH CAPACITY fuel filter. Commonly used on Dirt bikes, Pit bikes, ATV and Scooters. ... More Details

High quality VISUAL FILTER HIGH FLOW/HIGH CAPACITY fuel filter. Commonly used on Dirt bikes, Pit bikes, ATV and Scooters. ... More Details

High quality VISUAL FILTER HIGH FLOW/HIGH CAPACITY fuel filter. Commonly used on Dirt bikes, Pit bikes, ATV and Scooters. ... More Details

Fuel Filter - Plastic, 49cc - 250cc Maximum outer diameter of the connections is in approximately 7.2mm ... More Details

Fuel Filter - Plastic, 49cc to 250cc. ... More Details

Fuel Filter - Plastic, 49cc - 250cc Maximum outer diameter of the connections is in approximately 6.8mm ... More Details

Fuel Filter - Plastic, 49cc to 250cc Maximum outer diameter of the connections is in approximately 7.5mm ... More Details

Fuel Filter - Plastic, 49cc to 250cc Maximum outer diameter of the connections is in approximately 7.2mm ... More Details

Fuel Filter - Plastic, 49cc to 250cc Maximum outer diameter of the connections is in approximately 7.2mm ... More Details

High flow capacity transparent fuel filter. These filters hold 2-4 times more filtered material than comparable filters. Maximum outer diameter of the connections is in approximately 7.2mm ... More Details

Fuel filter. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc UTVs as well as many other clones, rebrand... More Details

Fuel filter, for (but not limited to) 150cc to 400cc ATV's, dirt bikes / pit bikes and scooters. Manufacturer part number 2.9.01.0140. Applies primarily to (but not limited to) Buyang 300cc 4x4 ATV, ... More Details

Plastic Fuel Filter (gas filter) commonly used on 49cc to 250cc ATVs and dirt bikes. This filter is equipped with a magnetic ring which captures metal particulates that manage to pass through the phy... More Details

Fuel Filter - Plastic ... More Details

High pressure fuel filter / gas filter. Commonly used for (but not limited to) 400cc and 800cc engines, such as the Hisun 400cc and Hisun 800cc 4x4 ATVs and Hisun 800cc UTVs, as well as many other clo... More Details

High pressure fuel filter / gas filter. Commonly used for (but not limited to) 400cc and 800cc engines, such as the Hisun 400cc and Hisun 800cc 4x4 ATVs and Hisun 800cc UTVs, as well as many other clo... More Details

Fuel Filter - Metal. Maximum outer diameter of the connections is in approximately 8mm. This fuel filter is most commonly used for (but not limited to) Chironex Spartan 500cc, 600cc and 1100cc EFI U... More Details

This fuel tank filter is typically found in the Fuel Tank section of several part manuals. Commonly used for but not limited to GX110, GX120, GX140, GX160, GX240, GX270, GX340, and GX390. It is most... More Details

Glass in-line fuel filters have glass body with chrome end caps. ... More Details

This is a silver colour CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. ... More Details

This is a red colour CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. ... More Details

This is a gold CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. ... More Details

This is a blue CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. ... More Details

This is a blue colour CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. ... More Details

This is a black CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. ... More Details

This is a red CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. ... More Details

This is a gold colour CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. ... More Details

Filter spring. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. These machines are commo... More Details

Spring plate. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. These machines are common... More Details

Dip stick / oil stick. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. These machines a... More Details